How To Use Molift Mrs Duo Flex; Adjusting Telescope Boom; Adjusting Heights Of Post; Castors - Etac molift MRS Duo Flex Manual De Usuario

Molift MRS Duo Flex / www.etac.com

Adjusting telescope boom

Easy to adjust width without tools. Loosen the
locking handle, slide boom to wanted position,
then tighten handle.
Remember to tighten the locking
handle when the boom is adjusted

Adjusting heights of post

1.
2.
3.
4.
Instant height adjustment (gas spring mecha-
nism). A simple user guide is placed above the
handle.
1. To adjust the height, loosen the height
adjustment handle. Turn the handle counterc-
lockwise until a faint click is heard.
2. Pull out the handle and adjust the height to
desired position.
3. When the handle is released it is important
that there will be a clear click to ensure that
the height is adjusted and thus locked.
4. Tighten the adjusting handle by turning it
clockwise.
How to use MRS Duo Flex

Castors

Two sets of castors with brakes. Simply step on
the pedal to activate the brake.

Lifting user

1. Make sure the floor is level.
2. Place the gantry straight above the user.
3. Make sure that all four brakes are activated.
4. Read the user manual for Molift Air or Nomad

Transport and storage

The lifter can be stored and transported under
temperatures between -25 - 70 °C and Relative
Humidity between 15 - 93 %.
7
Don`t stand under boom when adjust-
ing post height
before lifting user.
Never leave a user unattended in a
lifting situation.
Never lift the user higher than
necessary to carry out a lift.