How To Hang Your Ceiling Fan - Emerson RIPTIDE CF605BQ00 Manual Del Usuario

CAUTION
!
To reduce the risk of injury, install the fan so that the
blades are at least 7 ft. (2.1m) above the floor (Figure 19).
WARNING
!
The outlet box and joist must be securely mounted and
capable of supporting at least 50 lbs. Use only a U.L.
outlet box listed as "Acceptable for Fan Support of
22.7 kg. (50 lbs.) or less".
WARNING
!
To reduce the risk of fire, electric shock, or personal
injury, mount fan to outlet box marked "Acceptable
for Fan Support of 22.7 kg. (50 lbs.) or less", and
use screws supplied with outlet box. Most outlet
boxes commonly used for support of light fixtures
are not acceptable for fan support and may need to be
replaced. Consult a qualified electrician if in doubt.
WARNING
!
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box before wiring. All wiring
must be in accordance with National and Local codes
and the ceiling fan must be properly grounded as a
precaution against possible electrical shock.
4.1
Disconnect Electrical Power to the Branch Circuit at
the Circuit Breaker or Fuse Box before attempting to
install the Ceiling Fan Hanger Bracket on the Outlet Box
(Figure 20).
Figure 19
Figure 20
Please contact 1-800-654-3545 for further assistance
15
CEILING
AT
LEAST
7'
FLOOR
MAIN FUSE BOX
emersonfans.com
U.L. Model No.: CF605