Whirlpool WUI75X15HW Manual De Instrucciones página 4

3. Reinstall end caps
Reinstall the top and bottom end caps on the door (the top-right
end cap is now the bottom-left end cap and vice versa).
NOTE: For custom wood installation, skip this step.
4. Place panel back on door
Place the steel door panel back on
the door once all screws are
tightened. For custom door panel,
skip this step.
5. Screw hex screws back in
Screw the two hex-head screws back in at the bottom of the door.
For custom door panel, skip this step.
6. Return ice maker to upright position
Return the ice maker back to upright position.
Reverse Door Catch
1. Remove white screws
Remove the white decorative screws
from the opposite side of the door and
set aside.
2. Remove door catch
screws
Remove the screws from the
magnetic door catch and place the
door catch and the screws on the
opposite side of the door.
3. Install white screws on opposite side
Install the white decorative screws on the opposite side of the door.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
4. Plug in ice maker
Plug ice maker into a grounded 3–prong outlet.
Troubleshooting
See your Owner's Manual or visit our website and reference
Frequently Asked Questions to possibly avoid the cost of a service
call.
4