Tabla de contenido
Idiomas disponibles
Idiomas disponibles
6. Remove plastic screw cover
Remove the plastic screw cover from the inside of the hinges and
set aside.
7. Remove end caps
Remove the top and bottom plastic end caps from the door and
set them aside.
8. Unscrew door hinge screws
Unscrew the door hinge screws completely from top and bottom
hinges and set them aside.
9. Remove door
Remove the door and set it aside. Swap the hinge screws to the
opposite side.
WARNING
Crush Hazard
Articulated hinges are self closing and many pinch
points exist prior to cabinet installation.
Do not operate or close the hinges while they are
removed from the ice maker.
Failure to follow these instructions can result in crush,
cut, or pinch injuries.
10. Remove screws and hinges
Remove the screws and hinges from the cabinet with the Torx T25
screwdriver and set them aside.
11. Remove screw cap cover
Remove the screw cap cover and replace on the other side.
Preparing the Bottom Hinges
1. Unscrew and remove grill cover
Unscrew and remove the grill cover using a Torx T20 screwdriver.
Set grill cover and screws aside.
A. Grill cover screws
2
Tabla de contenido
