Kohler K–7219 Manual Del Usuario página 6

Apply
plumbers
Nut
putty.
Flange
Drain
Outlet
Drain
Gasket
Threaded
Cylinder
Drain Elbow
3. Secure the Drain Elbow
CAUTION: Risk of product damage. Do not kink or cause
damage to the cable during installation.
CAUTION: Risk of property damage. Make sure a watertight
seal exists on all bath drain connections.
Apply plumbers putty to the underside of the flange.
Set the flange on top of the drain outlet.
Apply silicone sealant to the underside of the drain gasket, then
place the drain gasket on top of the drain elbow.
Insert the nut through the center of the flange and onto the
threaded cylinder in the drain elbow.
Hand tighten the nut onto the threaded cylinder. Do not wrench
tighten at this time.
Remove any excess putty around the flange.
4. Secure the Overflow Elbow
Align the overflow elbow to the outside of the overflow outlet.
Insert the nut through the recessed side of the backplate.
Insert the nut with backplate onto the threaded cylinder of the
overflow elbow.
1054247-2-A
Overflow
Elbow
Overflow
Outlet
Threaded
Cylinder
Backplate
Nut
6 Kohler Co.