Tools And Materials; Before You Begin - Kohler K–7219 Manual Del Usuario

Ocultar thumbs Ver también para K–7219:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Tools and Materials

Adjustable
Plumbers
Wrench
Putty
Caulk
Gun
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Before You Begin

CAUTION: Risk of product damage. Do not kink or cause
damage to the cable during installation.
IMPORTANT! This product is required for K-11343 drop-in baths
and the K-11344 freestanding bath.
IMPORTANT! The distance from the top of the drain flange to the
top of the finished floor must be 1-1/2" (3.8 cm) for the K-11344
freestanding bath installation.
Observe all local plumbing and building codes.
Turn off the main water supplies.
Refer to the roughing-in dimensions of your bath to properly
install this product.
Carefully inspect the fittings for damage before installing.
If you are installing a new bath, install the drain before installing
the bath.
Kohler Co. reserves the right to make revisions in the design of
drains without notice, as specified in the Price Book.
1054247-2-A
Hex Wrench
Level
(supplied)
Silicone
Sealant
Hacksaw
2
P-Trap
Spanner
(supplied)
Tape
Measure
Kohler Co.
Tabla de contenido
loading

Este manual también es adecuado para:

K-7219

Tabla de contenido