UFESA BE1855 Manual De Instrucciones página 7

in", proceed as follows: Switch on the scale by gently placing your feet on
the glass surface. Press the down button until the required unit of weight is
shown. The unit of height also changes automatically.
NORMAL WEIGHT MODE
1. Gently place your feet on the surface of the scale to start the device and
wait for the symbol "0.0" to appear on the screen.
2. Stand in the centre of the platform and avoid sudden movements, keep
still and do not touch other objects until the scale shows your weight. The
user must wait while the weight is being calculated. The scale indicates that
it has completed the weighing by flashing the final value three times.
3. To save energy, the device goes into sleep mode after several seconds of
inactivity.
4. To return to normal operation, simply place your foot lightly on the plat-
form and wait for the symbol "0.0" to appear on the screen.
5. Replace the unit in a safe and stable place.
WEIGHT MODE WITH COMPOSITION
INFORMATION
1. This product enables you to obtain information regarding the composition
of your weight, indicating the values for body mass index, bone, muscle,
water, etc.
2. A user must first be configured in order to obtain this information. This
product has a memory capacity for up to 10 users. This memory stores
data on the gender, age and height of the person, but not the measurements
made with the product.
3. Press the SET button to configure a user. The corresponding user number
will flash on the display. To change user number use the up/down buttons.
Select the user confirming with SET button.
4. Then the icon to select the corresponding gender of the user will flash. To
change user gender use the up/down buttons. Press SET again to confirm.
5. Then the text AGE will start to flash and you can select the required age.
To select user age use the up/down buttons. Press SET again to confirm.
6. Finally you must select the corresponding height using the up/down
buttons and indicate the height of the user in cm. Press SET to confirm and
the configured values for this user will appear on the display. If you need to
make any changes proceed in the same way as to create the user.
7. Once the user is stored in the memory of the scale with gender, age and
height parameters, you must turn on the product by pressing the SET button
and scrolling through the memories using the up / down buttons to the
selected user to proceed to the reading. All data on gender, age and height
are displayed on the screen and then "0.0" will be shown indicating that you
can now start the weighing process.
8. Gently place your bare feet on the surface of the scale. You should
ensure that your feet are in contact with the metal electrodes of the product
surface.
9. Avoid sudden movements, keep still and do not touch other objects until
the scale displays a stable weight.
10. It will then proceed to calculate the composition of your weight, which
takes a few seconds. The values of BMI, fat, water (TBW), muscle, bone, Kcal
will be displayed on screen after this calculation. Calories are shown on
screen referring to the basal metabolic rate, i.e. the number of daily calories
needed to maintain the basic functions of your body.
11. Get off the device only after the calculation of the composition has been
completed.
12. The data will be displayed twice and then the scale will turn off.
7