Troubleshooting; Product Disposal - UFESA BE0906 Manual De Instrucciones

9. To save energy, the device goes into sleep mode after several seconds of
inactivity.
10. To return to normal operation, simply place your foot lightly on the plat-
form and wait for the symbol "0.0" to appear on the screen.
11. Replace the unit in a safe and stable place.
Contraindications:
This product is for domestic use only and not for professional purposes.
Children must be supervised by an adult to prevent them using the applian-
ce as a toy.
This device is not designed to be used by persons (including children) with
reduced physical, sensory or psychological capacities, or who lack the ne-
cessary experience and knowledge, unless they are supervised by a person
responsible for their safety.
Repair:
Only specialised personnel should perform repairs to this electrical applian-
ce. Any incorrectly performed repair may lead to considerable risk for the
user. In the event of repair, please always contact our aftersales service.
Failure to observe these instructions will lead to the total loss of the product
warranty.

TROUBLESHOOTING:

Possible operating anomalies
INCIDENT
The device
does not
work.
Error messa-
ges "Err"
PRODUCT CLEANING
This product can only be cleaned by hand, using a soft damp cloth and mild
soap. The use of abrasive cleaning products or brushes, solvents, benzine,
thinner or alcohol is completely prohibited. Never immerse the appliance or
any of its parts in water or excessively moisten it in order to clean it. Do not
re-use the appliance until it is completely dry.

PRODUCT DISPOSAL

Do not dispose of the product in the rubbish at the end of its shelf-life. Con-
tact the organic collection centre nearest your home in accordance with the
Waste Electrical and Electronic Equipment (WEEE) Directive 2012/19/EU to
contribute to the protection of the environment.
Request detailed information regarding the current methods for disposing of
packaging and used devices from your distributor.
We hope that you will be satisfied with this product.
6
CAUSE
Device not
switched on or
misplaced battery.
The device is
damaged.
Overload
SOLUTION
Put on the device, and wait until
your weight is shown or press on it
with your feet until "0.0" is shown
on the display.
Check that the battery is installed
with positive polarity "+" facing
outwards.
Contact the UFESA technical
service.
It means that it has exceeded the
maximum weight