Tare Function; Troubleshooting - UFESA BE1520 Manual De Instrucciones

8. Place yourself in the centre of the platform and avoid sudden movements,
keep still and without touching other objects, until the scale shows your weight.
The user must wait while the weight is being calculated. The scale indicates
that it has completed the weighing by flashing the final value. two times.
9. To save energy, the device goes into sleep mode after several seconds of
inactivity.
10. To return to normal operation, simply place your foot lightly on the
platform and wait for the symbol "0.0" to appear on the screen.
11. Replace the unit in a safe and stable place.

TARE FUNCTION:

This product has a TARE function that will enable you to weight your baby,
pet or suitcase.
Press the circular icon placed under the LCD display when the scale is off
The symbol showing that the TARE function is activated will flash on the
display .
The adult sign will remain on the display
Place yourself in the centre of the platform and avoid sudden movements,
keep still and do not touch other objects, until the scale shows your weight.
The user must wait while the weight is being calculated. The scale indicates
that it has completed the weighing by flashing the final value. two times.
Step off the scale and the symbol
Place yourself centre of the platform with your baby or pet in arms, or that
you want to weigh, and the scale will show the weight.
Contraindications:
This product is for domestic use only and not for professional purposes.
Children must be supervised by an adult to prevent them using the device
as a toy.
This device is not designed to be used by persons (including children)
with reduced physical, sensory or psychological capacities, or who lack
the necessary experience and knowledge, unless they are supervised by a
person responsible for their safety.
Repair:
Only specialized personnel should perform repairs to this electrical device.
Any incorrectly performed repair can lead to considerable hazards for the
user. In the event of repair, please always contact our aftersales service. Failure
to observe these instructions will lead to the total loss of the product warranty.

TROUBLESHOOTING:

Possible operating anomalies
INCIDENT
The device
does not
work.
Error messa-
ges "Err"
6
and "0.00" will be shown.
CAUSE
Device not
switched on or
misplaced
battery.
The device is
damaged.
Overload
and "0.0" will be shown.
SOLUTION
Put on the device, and wait until
your weight is shown or press on it
with your feet until "0.0" is shown
on the display.
Check that the battery is installed
with positive polarity "+" facing
outwards.
Contact the UFESA technical
service.
It means that it has exceeded the
maximum weight.
.