D- Using Your Product - Ugur UFR 370 SD Guia Del Usuario

D- USING YOUR PRODUCT

Start-up
WARNING!
• This operating manual applies for various device models. Hardware scopes of the models may vary. There
may be diff erences in the pictures.
• Clean inside and all accessories of your product before the first start up. (see page 22).
• If your product has been shaken so much during the transportation and positioning, wait for one (1) hour
without running it. Thus, the compressor oil, which may enter into the system, will return back. You may
damage the compressor if you run it without considering this.
• Insert your product's plug into an outlet with alternative current of 220-240V/50 Hz only, which has been
installed according to the regulations. (Picture 11)
• You will hear a slight sound from the compressor when your product is running.
• The fan inside your product will stop once you open the door of your cabinet.
• If the lights of your product do not light, put the 0-1 switch under the canopy to position 1. (Picture 12-13)
EN
PICTURE 11 PICTURE 12
46
PICTURE 13