General Information - UFESA SB-155 Manual De Instrucciones

GENERAL INFORMATION:

Thank you for choosing Ufesa.
Check that the device is intact and has no damage. Please contact the store
where you purchased the product for any query you may have.
You have acquired the following through your purchase:
• 1 Ufesa bathroom scales
• 1 Ufesa kitchen scales
INSTRUCTIONS FOR USE
Ensure that the safety instructions marked the beginning of this manual are
followed at all times during use.
Follow the instructions below for the start-up of this device.
1. Remove the product from its original packaging, taking special care not
to damage any of its parts. Do not use any excessive force to remove the
product from the box.
2. Remove the battery cover at the back of the scales.
3. Place the charged battery in the location indicated on the cover, observin its
polarity, i.e. positive "+" facing upwards.
4. Close the cover again
5.Place the appliance on a horizontal, solid, rigid, flat, stable surface that is
free of vibration.
BATHROOM SCALES
The scale allows a maximum weight of 150kg and a precision level of 100g
6. Gently place your feet on the surface of the scales in order to start up the
device and wait until the "0.0" symbol appears on the screen.
7. Prepare the device in accordance with the weight unit, selecting the Kg/Lb/
st weight units, pressing the button located on the back of the scales, marked
with the word "UNIT"
8. Step into the centre of the platform, avoiding any sudden movements, keep
still and do not touch any other objects, until the scales shows your weight.
The user must wait while the weight is being calculated. The scales indicate
that the weighing operation is complete by flashing the final value three times.
9. The device turns off after several seconds of being inactive in order to save energy.
10. Simply gently step onto the platform and wait for the "0.0" symbol to
appear on the screen in order to return to normal operation.
11. Restore the appliance in a safe and stable place.
KITCHEN SCALES
The scale allows a maximum weight of 5kg and a precision level of 1g.
12. Pressing the power button will display "88888," followed by the zero value
(in the event that the scale shows a different value to 0, it should be stabilised
by moving it until 0 is displayed and a circle appears in the lower left part
of the screen "o"). Change the measurement by pressing the unit button and
choosing g/oz/lb/kg, before starting a weighing operation.
13. This scales has tare function that enables different products to be measured
without the need to empty the container you are using. Therefore, once turned
on, place the container and press the "Tare" button, which will display the icon
"0" if the weight is less than about 150 gr or "Tare" if the weight is higher, and 0
will appear once again. Place the first product to be weighed.
14. Keep the on button pressed down for a few seconds and it will turn off,
otherwise it will turn off in 2 minutes when pressed.
15. Replace the appliance in a safe place.
7