Luminance Brands Kathy Ireland Home HF1161BQ00 El Manual Del Propietario página 6

3. Industrial Fan Assembly
3.4
Separate, untwist and unkink the Three 80" Motor Wires
and the Safety Cable, then route them through the
Motor Cover Center Hole.
Align the Four Holes in the Motor Cover with the
Threaded Holes in the Motor Yoke.
Secure the Motor Cover to the Motor Assembly by
installing Four #8-32 x 1/4" Pan Head Screws and
#8 External Tooth Lockwashers (supplied) (Figure 4).
3.5
Route the Three 80" Motor Wires and the Safety Cable
through the Ceiling Cover Center Hole and position the
Ceiling Cover over the Motor Yoke (Figure 5).
3.6
Route the Three 80" Motor Wires and the Safety Cable
through the Hanger Ball/Downrod Assembly and seat
the Downrod in the Motor Yoke (Figure 6).
(Continued)
#8-32 x 1/4" PAN HEAD
SCREW
#8 EXTERNAL TOOTH
LOCKWASHER
MOTOR COVER
Figure 4
CEILING
COVER
MOTOR
YOKE
Figure 5
MOTOR WIRES (3)
HANGER BALL/
DOWNROD
ASSEMBLY
MOTOR YOKE
Figure 6
6
SAFETY
CABLE
ETL Model No.: HF1161