Urbanears Plattan 2 Guia Del Usuario página 2

1
4
2 2
3
How it all works
1 Work the Control Knob 2 Charge the battery
When there is less than 60 minutes of power left
On/off you will hear an alert tone and the LED will blink
Press and hold for 3 seconds red. To charge, connect your headphones to a
USB power source using the micro USB cable.
Play/pause
2.5 hours of charging gives approximately 30
Click once
hours of cord-free play time.
Next song
Push to the right 3 What the LED indicators mean
Red Low battery
Previous song
Green Fully charged
Push to the left
Blue Bluetooth
Fast forward
Off Switched off or in normal operation
Push to the right and hold
4 Use the ZoundPlug
Rewind
Use the empty 3.5 mm socket to share
Push to the left and hold
your music with a friend. Just plug in a
Increase volume
pair of wired headphones and enjoy.
Push upwards
Pair with a Bluetooth
Decrease volume
1 Begin with your headphones turned off
Push downwards
2 Press and hold the control knob for
Handle calls
5 seconds until the LED blinks blue
– Click once to answer or hang up
– Double-click to reject an incoming call 3 Open the Bluetooth
sound source and select Plattan 2 BT
Activate/stop Siri*
from the list of available devices
Double-click
*Siri only works when paired
with an iOS or macOS device
Play your first song
– Press and hold the
control knob until
the LED blinks blue
– Select Plattan 2 BT
in your device's
® pairing mode
Bluetooth
– Play a song and enjoy!
sound source
®
menu on your
®
Charge first, then play
Connect your headphones to a
USB power source using the
micro USB cable. When the LED
turns green they're ready to play
menu
®
English
01