Movement Treadmill R4 Manual Del Propietário página 82

OPERATING INSTRUCTIONS
•Press "STOP" with the conveyor moving, and the conveyor will slow down slowlyuntil it
stops. Everything goes back to standard mode.
•In any mode, if the security key is pulled out, the display shows E7 and the alarm
sounds. The mat stops.
•The controller is always monitoring. The treadmill will stop in the event of an abnormal
occurrence. The display will show the message ERR and an audible alert.
•When the display shows the message ERR, press the "STOP" key, and the ERR message
will be cleared.
BODY FAT FUNCTION
The body mass index or FAT is a measure of a person's height and weight. The FAT is
suitable for any type of person and can help provide data to help that person adjust their
weight. The ideal FAT range is between 18 - 24, if the range is less than 18 it means that
the person is very thin, if he is between 25 to 28 it means that that person is overweight
and if he is over 29 he is considered obese . (FAT data cannot be used as medical data.)
•To enter the FAT program, press the P key until FAT appears on the display. Press the
MODE key to change the data that will be imputed on the console, use the + and - keys
to add the necessary parameters in the settings.
•When entering the FAT configuration, the Display will flash F1 indicating that the
Person's Gender must be chosen, select 1 for male or 2 for female.
•Press the MODE key to go to the second setting, the F2 will flash on the display
indicating that the age is to be entered, the initial value shown will be 25. The value can
be changed between 1 - 99 years.
•Press the MODE key to go to the third setting, F3 will flash on the display indicating
that the height is entered, the initial value shown will be 170 cm (67 inches). The value
can be changed between 100-220 cm (39-87 inches.)
•Press the MODE key to go to the fourth setting, F4 will flash on the display indicating
that the weight is entered, the initial value shown will be 70 kg (154 pounds). The value
can be changed between 20 - 150 kg (44-330 pounds).
•Press the MODE key to go to the fifth setting, the F5 will flash on the display indicating
that it will calculate the BMI (Body Mass Index). Place your hands on the heart rate
sensors and keep your hand still, the display will start to flash indicating that the BMI is
being calculated, after four seconds it will show the value of the body mass index.
•To exit FAT mode, press the STOP key.
USER PROGRAM
The treadmill has three user modes: USER01, USER02, and USER03, which can be
adjusted by the user himself. Press the "PROGRAM" key to select the program U01 ~
U03. Press the "MODE" key to set the parameters. The user can define his own 10 speed
and incline segments. After defining the parameters, press "START" to set the belt in
motion. The user's exclusive program will be saved automatically and can be used in the
future.
32