Use And Operation - Klarstein 10029462 Manual Del Usuario

Control Panel and Timer
1 Oven function selector knob
2 Power indicator light
3 Oven programmer/timer
4 Oven operating light
5 Thermostat control knob
6 LED display
7 Automatic function symbol
Setting and Using the Oven Programmer/Timer
After your appliance is connected to your mains supply for the first time (or after a power-cut) the numbers
on the timer display will flash. Before you can select a cooking function or set a temperature, you must set the
appliance into "manual operation" mode. To select manual operation mode, press the program button (12) for
three seconds. The oven in use symbol (8) will light in the display.
Setting the time of day
After your appliance is connected to your mains supply for the first time, you must set the time of day before
you can use the oven.
• Make sure the oven is in manual operation mode (as outlined above).
• Press the program button (12) once to set the time of day. Whilst the decimal point symbol (9) is flashing, use
the plus (11) and minus (13) buttons to set the correct time of day.
• When the correct time of day is shown on the LED display, release the plus and minus buttons and wait a
few seconds. The decimal point symbol (9) will stop flashing and the oven is ready to use.

Use and Operation

8 Oven in use symbol
9 Decimal point symbol
10 Minute minder symbol
11 Plus button
12 Manual button
13 Minus button
20