Klarstein 10029462 Manual Del Usuario página 19

Installing the oven into the kitchen cabinet
The kitchen area should be dry and aired and equipped with efficient ventilation. When installing the oven,
easy access to all control elements should be ensured.
• Ensure that the aperture that you will be fitting the oven into is of the size given in the above diagram.
• The oven must be fitted into an oven housing with the ventilation cut-outs shown in the "Ventilation requi-
rements" section on the next page.
• Ensure that the rear panel of the furniture housing unit has been removed.
• Ensure that the oven has been securely fixed into the housing unit. The fixing of the oven into the housing
is made by using four screws. These should be screwed through the oven cabinet and into the housing unit.
Ventilation requirements
Figure shows the ventilation and cut-out requirements
for the installation of the appliance into a tall housing unit:
1 Rear panel
2 Remove rear from this section
3 Rear panel
4 Minimum ventilation cut-out 200 cm
5 Plinth
6 Storage space
7 Storage space
19
2