AAK Safety Smartline Instrucciones De Uso página 9

Company AAK Safety AS
Document name Instructions for use, Smartline
Document number TEC-GL-001-011-ENG-15
Date 05.05.2017
Instructions for use, Smartline
5.4 Marking of the rope and the descender device
The rope is marked at the upper knot with the manufacturer of
the Smartline, a 3 letter code for the assembler of the rope, and
the serial number.
The descender device is marked with notified body, the
relevant European standard and serial number indicating year
of production and a batch number.
Compatibility
6
Every component used together with the Smartline should be
CE-marked.
6.1 Harnesses
The Smartline may be used in combination with a sit-harness
to EN813, a full body harness to EN361 or a rescue harness
according to EN1497. It shall be attached to the harness as
recommended by the manufacturer. In case of self-rescue it
must be connected to a frontal attachment element, and
preferably a low one.
6.2 Anchorages
The anchor sling may be used on constructions without
permanently installed anchors. The anchor sling should
preferably be placed around bearing parts of the construction,
and must be able to support a minimum load of 12 kN. The
karabiner may also connect directly to a part of the structure as
long as this part supports a load of 12 kN and does not cause
unintended strain on the karabiner.
If temporary anchors are used, these shall conform to EN795.
TEC-GL-001-011-ENG-15
Page 9 of 11