Loading The Tool - Stinger CS150 Manual Del Propietário

www.stingerworld.com

LOADING THE TOOL

FOR USE WITH 7/8", 1-1/4", or 1-1/2" STINGER STAPLEPAC
• Disconnect air.
green Cover Release Tab and lifting.
• Place cap reel in Magazine. Make sure the front end of the cap
coil is placed over the cap guide area of the Magazine. Insert
lead cap into the Feed Chute.
• Slide caps along the Feed Chute with fingers until they engage
the Cap Feeder. Pull the Cap Feeder back and release to
advance caps until the first cap is under the Nose of the tool.
• Close the Magazine Cover.
• Pull back the Staple Follower until the Latch catches.
• Place staples in Staple Track.
• Release the Catch Button. Plug into air source. Tool is ready
to use.
CAP STAPLES ONLY
®
Open the Magazine Cover by pushing the
6