Idiomas disponibles
Idiomas disponibles
Replacement of the battery
1. Remove the housing cover.
2. Remove the old battery from its fitting.
3. Insert 6 new batteries size micro cell (AAA). When doing so, mind the
correct polarity as shown on the bottom inside the battery fitting.
4. Reattach the casing cover to the casing body with a audible click into
Place and screw it.
Please make sure that the insulation jacket of the battery is not
damaged or damaged when it is inserted into the battery
compartment. A damage can cause a short-circuit and overheat the
battery.
General information
1. Electric appliances, packaging material etc. should be kept away
from children.
2. Dispose packaging and worn out material correctly and in an
environmentally friendly way.
3. Do only pass on the device including the operation manual.
4. Subject to change of design and technical data without notice for the
sake of constant product improvement.
Safety instructions
Important: Damage caused by not adhering to the operating instructions
is not covered by guarantee. ISOTRONIC accepts no liability whatsoever
for any resulting consequent damages.
- Only operate the device at its intended voltage.
- In case of repairs, only use original spare parts, to avoid serious
damage.
- Repairs or other works, e.g. changing a fuse, etc. may only be carried
out by an appropriately trained, skilled person.
- It must be noted that operator or connecting errors lie outside the
influence of ISOTRONIC and we cannot accept any liability for resulting
damages.
- Always check whether the device is suitable for the respective place
where you intend using it
- This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible
for their safety.
