Kohler Vanity Guía De Instalación Y Cuidado página 12

Bottom
of Drawer
Remove/Adjust the Drawer
Alignment
To adjust the height and level the drawer, move the tabs
underneath the front corners back or forward as needed.
For fine adjustment, loosen the screws behind the drawer face,
then hold the drawer face level while retightening the screws.
Removal
Fully extend the drawer.
From underneath, press the release latches toward the sides of the
drawer.
Lift the front of the drawer to disengage from the rails.
Reinstallation
Fully extend the rails.
Align the holes in the back of the drawer with the rail hooks.
Rotate the drawer down onto the rails, engaging the latches with
the rails.
Push the drawer closed to fully engage the latches.
To ensure the drawer is properly engaged, lightly lift the front of
the drawer. If not engaged, repeat the "Reinstallation" procedure.
1216526-2-F
Tab
12
Screw
Hole
Rail
Kohler Co.