Clarion Next GATE SC1U Guia De Inicio Rapido

SC1U
TX-1117B
7" In-Vehicle Smartphone Controller
Contrôleur 7" pour smartphone dans les véhicules
Controlador de smartphone para vehículos de 7 pulgadas
About the Registered Marks, etc. / À propos des marques déposées ou autres / Sobre las marcas registradas, etc.
"Made for iPhone" means that an electronic accessory has been designed to connect specifi -
cally to iPhone and has been certifi ed by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and
regulatory standards. Please note that the use of this accessory with iPhone may affect wire-
less performance.
iPhone, iPod and iTunes are trademarks of Apple Inc., registered in the U.S. and other coun-
tries.
The Bluetooth mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks
by Clarion Co., Ltd. is under license.
Other trademarks and trade names are those of their respective owners.
Pandora, the Pandora logo and other Pandora marks are trademarks or registered trademarks
of Pandora Media, Inc. or its subsidiaries worldwide.
Package Contents / Contenu de l'emballage /
Contenido del paquete
Display Stand
Affi chage Socle
Pantalla Pie
Power cable 1.5 m (Car charger)
Stopper
Cordon d'alimentation de 1,5 m
Butée
(chargeur de voiture)
Tope
Cable de alimentación eléctrica de 1,5 m
(cargador para automóvil)
Connecting cord 1.5 m Quick Start Guide
(Cradle-iPhone-audio) Guide de démarrage rapide
Guía de inicio rápido
Cordon de raccordement de 1,5 m
(Support-iPhone-système audio)
Warranty card
Cable de conexión de 1,5 m
Carte de garantie
(Base-iPhone-audio)
Tarjeta de garantía
Example System / Exemple de système /
Sistema de ejemplo
General Guide
1 2 3
9
0 ! @
1 Microphone
2 Main switch
4
3 Volume button
5
4 Bluetooth indicator
5 Reset button
6 MicroSD card slot
7 Terminal
8 Speaker
8 7 6
9 Release button
0 Power cable jack
! Smartphone connector
@ External mic connector
Main Switches and Functions
button
3
1
Returns to Smart Access screen.
2 button
4
• Short press (less than two sec.)
3
– Turns the power on when the device is
turned off.
4
– Display Dimmer (brightness) change
• Long press (more than two sec.)
button
1
Pop-up display appears with two options.
Launches the Voice Recognition function
– Display Off
when Smart Access application is in use.*
Touching the touch panel returns it from
* The voice recognition application must be
Display Off.
installed on your iPhone.
– Power Off (Goes to Suspend Mode)
button
2
* If the device is not used for a long time
• Short press (less than two sec.)
and it is in the suspend mode, the backup
Returns to the Menu screen.
battery may run down, causing the OS to
• Long press (more than two sec.)
start up slowly.
Audio Control tab appears.
• Long press (more than eight sec.)
(The tab disappears when other display areas
Shuts down the system completely.
are touched.)
3
Mastering the Functions
Phone
The iPhone connected via Bluetooth can be used hands-free. Further, if
you install the phonebook application "Contacts4car" on the iPhone, which
works with the device, it can display the contacts information saved on
your iPhone.
NOTE
• In order to use your iPhone hands-free, this device and your iPhone
must be connected with the connecting cable and via Bluetooth. If
you cannot use the phone functions, follow the directions for making
Bluetooth settings in "Using the Device the First Time".
History
The phonebook application
launches.
• To use the phonebook applica-
tion, follow steps 1 to 5 under
"Applications" to install the
Contact4car application and
then connect your iPhone to this
Calling
device.
Incoming Call
Printed in China / Imprimé en Chine / Impreso en China
2012/3 280-SC1U-00
Quick Start Guide
Guide de démarrage rapide
Guía de inicio rápido
Le symbole Bluetooth et les logos sont la propriété de Bluetooth SIG, inc. et toute utilisation de
tels symboles par Clarion Co., Ltd. est autorisée sous licence.
Les autres marques de fabrique et dénominations commerciales appartiennent à leurs dé-
tenteurs respectifs.
Pandora, le logo Pandora et les autres symboles Pandora sont des marques déposées ou non
de Pandora Media, inc. ou de ses fi liales dans le monde.
La marca Bluetooth y sus logos son propiedad de Bluetooth SIG, Inc. y todo uso de dichas
marcas por parte de Clarion Co., Ltd. se efectúa bajo licencia.
Otras marcas comerciales y nombres comerciales son de sus respectivos propietarios.
Pandora, el logo de Pandora y otras marcas de Pandora son marcas comerciales o marcas
registradas de Pandora Media, Inc. o de sus fi liales en el mundo.
Federal Communications Commission (FCC) Statement
Federal Communications Commission (FCC) Statement
You are cautioned that changes or modifi cations not expressly approved by the part re-
You are cautioned that changes or modifications not expressly approved by the party
sponsible for compliance could void the user's authority to operate the equipment.
responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reason-
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
Cradle
able protection against harmful interference in a residential installation. This equipment
protection against harmful interference in a residential installation. This equipment
Support generates, uses and can radiate radio frequency energy and, if not installed and used in ac-
generates, uses and can radiate radio frequency energy and, if not installed and used in
cordance with the instructions, may cause harmful interference to radio communications.
Base accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
− Reorient or relocate the receiving antenna.-Increase the separation between the equip-
- Increase the separation between the equipment and receiver.
ment and receiver.
− Connect the equipment into an outlet on a circuit different from that to which the receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected. is connected.
− Consult the dealer or an experienced radio/TV technician for help.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must two conditions: (1) this device may not cause harmful interference and (2) this device must
accept any interference received, including interference that may cause undesired operation.
accept any interference received, including interference that may cause undesired opera-
You are cautioned that changes or modifications not expressly approved by the party tion.
responsible for compliance could void your authority to operate the equipment. You are cautioned that changes or modifi cations not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
FCC RF Radiation Exposure Statement
This transmitter must not be co-location or operating in conjunction with any other antenna FCC RF Radiation Exposure Statement
or transmitter. This transmitter must not be co-location or operating in conjunction with any other an-
tenna or transmitter.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment.
This equipment complies with FCC RF radiation exposure limits set forth for an uncon-
This equipment should be installed and operated with a minimum distance of 20 centimeters trolled environment.
between the radiator and your body.
This equipment should be installed and operated with a minimum distance of 20 centime-
ters between the radiator and your body.
This Class B digital apparatus complies with Canada ICES-003.
This Class B digital apparatus complies with Canada ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Operation is subject to the following two conditions: (1) this device may not cause interference,
Operation is subject to the following two conditions: (1) this device may not cause interfer-
and (2) this device must accept any interference, including interference that may cause
ence, and (2) this device must accept any interference, including interference that may
undesired operation of the device.
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
The abbreviation, IC, before the registration number signifi es that registration was per-
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil
formed based on a Declaration of Conformity indicating that Industry Canada technical
ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
specifi cations were met. It does not imply that Industry Canada approved the equipment.
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement. To prevent radio interference to the licensed service, this device is intended to be operated
This equipment complies with radio frequency exposure limits set forth by Industry Canada for indoors and away from windows to provide maximum shielding. Equipment (or its transmit
an uncontrolled environment. This equipment should be installed and operated with minimum antenna) that is installed outdoors is subject to licensing.
distance 20 cm between the device and the user or bystanders.
Operation is subject to the following two conditions: (1) this device may not cause interfer-
Cet équipement est conforme aux limites d'exposition aux radiofréquences définies par
ence, and (2) this device must accept any interference, including interference that may
Industrie Canada pour un environnement non contrôlé. Cet équipement doit être installé et
cause undesired operation of the device.
utilisé avec un minimum de 20 cm de distance entre le dispositif et l'utilisateur ou des tiers.
1
Installing in Your Vehicle
3
Mount this device on a fl at, smooth
surface, such as on the windshield.
CAUTION
• Install the unit in a location where it
7
will not interfere with vehicle opera-
tion or air bag deployment and will
not block the driver's fi eld of vision.
• Vibration may cause it to fall off, so
mount it in a safe place.
4
• Make absolutely sure that the stand
and display are securely mounted to
your vehicle before driving it.
• Be sure to unplug the car charger
from the vehicle's power socket
before mounting or removing the
display from the vehicle.
• If the device is on and something,
such as a piece of metal, touches
the electrodes of the cradle and the
display, it may short out the devices. 5
1
Wipe the area for mounting the
device clean of any oil or other
foreign matter.
2
Connect the power cable 1,
connecting cord 2 and external
microphone (sold separately) 3 in
Terminals
that order.
6
7
Music Applications
You can play music stored on your iPhone. Once the Smart Access application is installed on an iPhone, this device can
operate linkable applications.
1 4 • The Smart Access app introduces you to applications that can be linked and
manages their startup once they are installed.
5
2
NOTE
6
• The Smart Access app is not supported with the iPhone 3GS or iPhone 3G.
3 7
1
Next/Fast-forward
1
2
Play/Pause
2
Previous/Rewind
3
Return to the iPod browse lists
4 ® 3
Previous album artwork
5
4
Next album artwork
6
Enter the current selection
7
5
6
7
NOTE
• When using iOS 5, it is necessary to tap the "Accept" button displayed
Precautions / Précautions / Precauciones
5615N3940001 R01 5615N3940001 R00
Important
Due to ongoing product development, there may be variations in operation between
this owner's manual and the actual software on the unit. This manual is updated
periodically. You will be able to download the latest manual from the Clarion portal
site for use (http://my.clarion.com).
Precaution Icons
Precautions are divided into two types and identifi ed by the icons described below,
depending on the severity of the risk of personal injury or property damage when
the unit is used incorrectly. Always be sure to carefully read and understand each
precaution before moving on to the rest of the manual.
This icon indicates the risk of death or serious personal
WARNING
injury may result if precautions are ignored.
This icon indicates the risk of serious personal injury or
CAUTION
material damage may result if precautions are ignored.
Important
Du fait du développement des produits en cours, vous pouvez rencontrer des écarts
de fonctionnement entre ce mode d'emploi et le logiciel existant sur l'appareil. Ce
manuel est actualisé régulièrement. Vous pouvez télécharger le manuel le plus
récent sur le site du portail de Clarion (http://my.clarion.com).
Icônes de précaution
Les précautions sont divisées en deux types et identifi ées par les icônes présentées
ci-dessous, selon la gravité du risque de dommage corporel ou matériel encouru
si l'appareil est mal utilisé. Veillez toujours à lire attentivement et à comprendre
chaque précaution avant de poursuivre la lecture du manuel.
Cette icône indique un risque de blessures corpo-
relles graves ou mortelles si les précautions sont
AVERTISSEMENT
ignorées.
Cette icône indique un risque de dommages cor-
porels ou matériels graves si les précautions sont
ATTENTION
ignorées.
Importante
Debido al desarrollo continuo de productos, pueden existir diferencias en cuanto
al uso de este producto entre el manual de este propietario y el software real en la
unidad. Este manual se actualiza periódicamente. Podrá descargar el manual más
reciente desde el portal Clarion (http://my.clarion.com) para su uso.
Íconos de advertencia
Las precauciones se dividen en dos tipos y se identifi can mediante los íconos
descritos a continuación, dependiendo de la gravedad del riesgo de lesiones per-
sonales o daños a la propiedad cuando se utiliza la unidad de forma incorrecta.
Asegúrese siempre de leer detenidamente y comprender cada precaución antes de
avanzar con el resto del manual.
Este ícono indica que puede existir riesgo de muerte o
lesiones personales graves si se ignoran las precau-
ADVERTENCIA
ciones.
Este ícono indica que pueden existir lesiones per-
sonales graves o daños materiales si se ignoran las
PRECAUCIÓN
precauciones.
2
Using the Device the First Time
Mount the cradle on its stand.
CAUTION
• Refrain from operating your iPhone
while driving as doing so may cause an
accident. Avoid looking at the display
for a long time.
Tighten
1
Start the vehicle's engine.
• To avoid running down the vehicle's
battery, use the device with the engine
running.
Mount the stand to the windshield.
2
Connect the car charger to the ve-
• Make sure the stand's suction pad
hicle's power socket.
sticks securely to the surface.
3
Press the button briefl y to turn the
power on.
The system starts.
• If the power fails to come on, make sure
the display is mounted properly in its
cradle.
4
Read the warning screen and touch
[Agree] if you agree.
Mount the display in the cradle.
5
• Align the terminals on the rear of the
Read how personal information is
display to those of the cradle and
handled. Touch [Agree] if you agree.
mount the display.
• If you do not need to see this message
again, touch the check box and then
Click!
touch [Agree].
Connect the audio OUT mini-jack of
the connecting cord to the vehicle's
audio system.
Connect the external microphone
(sold separately).
Install the Smart Access app on your iPhone.
• Find the Smart Access app on iTunes
® or in the App Store and install it.
Launch the Smart Access app on your iPhone, and select the application(s)
you wish to use and download them.
• Applications are downloaded from the App Store.
Start your vehicle's engine and turn this device on.
Release lock(s) of your iPhone and launch the Smart Access application.
• If you connect this device with an iPhone on which Smart Access is not running,
the application may not work properly.
Connect your iPhone to the device using the connecting cord.
Press the button.
A list of applications that can be used with this device
is displayed.
Enjoy whichever application you wish.
on the iPhone side and authorize the displayed Smart Access application.
After closing some applications, it returns to the HOME screen and you
may have to repeat the procedure indicated above. Follow all regulations
with safety in mind when using the device.
WARNING
Note the following precautions about the built-in lithium ion battery, which acts as
the backup battery for the OS of this device when it is in its suspend mode. Mis-
handling of the battery creates the risk of fl uid leakage, overheating, explosion, and
combustion, creating the risk of fi re and personal injury.
• Never leave this unit on the dashboard of a car or anywhere else it may be
exposed to direct sunlight, and never leave it where it may be subject to high
temperature or humidity, such as inside a vehicle in the sun. If the device is not
used for a long time, the OS may take longer than usual to start up.
• Always start the vehicle's engine before using the car adapter. Use of the car
adapter with the engine stopped may run down the vehicle's battery.
• This unit is designed for use in a 12V/24V DC negative ground vehicle only. Use
only the specifi ed car adapter that comes with the unit.
CAUTION
• Never try to disassemble, repair, or modify the unit, and never cut the cover of the
cord in an attempt to draw power for another device. Doing so creates the risk of
fi re, electric shock, and accident.
• This unit is not water resistant or dust resistant. Water and dust create the risk of
fi re and smoke, combustion, electric shock, and malfunction.
AVERTISSEMENT
Veuillez noter les précautions suivantes relatives à la batterie au lithium-ion in-
tégrée, servant de batterie de sauvegarde pour le système d'exploitation de cet
appareil lorsqu'il est en mode de veille. Une mauvaise manipulation de la batterie
présente un risque de fuite du liquide de la batterie, de surchauffe, d'explosion et de
combustion, susceptible de provoquer un incendie ou des blessures.
• Ne laissez jamais cet appareil sur le tableau de bord d'un véhicule ou dans tout
endroit où il pourrait être exposé aux rayons directs du soleil et ne le laissez
jamais dans un endroit très chaud ou très humide, comme à l'intérieur d'un véhi-
cule garé au soleil. Si l'appareil n'est pas utilisé pendant une période prolongée, le
système d'exploitation peut prendre plus de temps que d'habitude pour démarrer.
• Démarrez toujours le moteur du véhicule avant d'utiliser l'adaptateur auto.
L'utilisation de l'adaptateur auto avec le moteur éteint peut épuiser la batterie du
véhicule.
• Cet appareil est conçu pour être utilisé dans un véhicule à alimentation de
12 V/24 VCC avec prise de masse négative uniquement. N'utilisez que l'adaptateur
auto spécifi é accompagnant l'appareil.
ATTENTION
• N'essayez jamais de démonter, réparer ou modifi er l'appareil, et ne découpez
jamais le couvercle du cordon pour essayer d'alimenter un autre appareil, sous
peine d'engendrer un risque d'incendie, d'électrocution et d'accident.
• Cet appareil n'est étanche ni à l'eau ni à la poussière. L'eau et la poussière peuvent
engendrer un risque d'incendie, de fumée, de combustion, d'électrocution et de
dysfonctionnement.
ADVERTENCIA
Tenga en cuenta las precauciones siguientes acerca de la batería de iones de litio
incorporada, que actúa como batería de respaldo para el SO de este dispositivo
cuando se encuentra en modo Suspender. Utilizar mal la batería crea el riesgo de
fugas de fl uido, sobrecalentamiento, explosión y combustión, creando, a su vez, el
riesgo de incendio y de lesiones personales.
• Nunca deje esta unidad en el tablero de un automóvil ni en ningún otro lugar
donde pueda estar expuesta a la luz solar directa, y nunca la deje donde pueda
estar sometida a alta temperatura o humedad, como ser el interior de un vehículo
al sol. Si no se utiliza el dispositivo durante mucho tiempo, el SO puede demorar
más de lo habitual para iniciarse.
• Siempre arranque el motor del vehículo antes de utilizar el adaptador para au-
tomóvil. El uso del adaptador para automóvil con el motor detenido puede agotar
la batería del vehículo.
• Esta unidad está diseñada para ser utilizada solo en un vehículo con descarga a
tierra negativa de 12 V/24 V CC. Utilice solo el adaptador para automóvil espe-
cifi cado que viene con la unidad.
PRECAUCIÓN
• Nunca intente desarmar, reparar o modifi car la unidad, y nunca corte la cubierta
del cable para obtener energía eléctrica para otro dispositivo. Hacerlo crea el
riesgo de incendio, descarga eléctrica y accidentes.
• Esta unidad no es resistente al agua ni al polvo. El agua y el polvo crean el riesgo
de incendio y humo, combustión, descarga eléctrica y mal funcionamiento.
Connecting via Bluetooth 11
® Touch [Add].
To use the phone, it is necessary to con-
nect the device and your iPhone via
®
Bluetooth.
6
Release lock(s) of your iPhone and
turn the Bluetooth setting for your
iPhone to ON.
• If the device is connected to a locked
12
Enter the PIN shown on the display
iPhone, the device may not work
on your iPhone.
properly.
The device and your iPhone are con-
7
Connect the iPhone to the device with
nected via Bluetooth.
the connecting cable.
13
Touch the menu you wish to use.
After turning the device on, when it is
The desired screen opens.
connected to your iPhone, the iPhone
starts up with its in-vehicle function
active.
8
Touch [Settings].
1
1 Phone
2 Music
9
Touch [Bluetooth and Audio].
3 Applications
10
Touch [ON] for "Bluetooth", and
4 Settings
then touch your iPhone name key for
"Device Select".
Specifi cations
Product Features
Settings
IFeatures:
Smart Display Connectable with iPhone 4S and iPhone 4
The Settings screen allows you to make
ISafe Operation:
environment settings for this device and
User interface designed with your safety in mind
Bluetooth settings.
Speech recognition
IEasy to Use:
• You will be able to download the latest
manual from the Clarion portal site for Large touch-panel screen
use (http://my.clarion.com). IA Snap to Install:
Add-on installation using existing on-board devices
System screen
On-dash mount minimizes alterations to your vehicle
Powered by 12 V cigarette lighter
IExpandability:
The application is designed with future expansion in
mind.
Basic Functions
Compatible with iPod music playback functions on the
iPhone
Compatible with Pandora ® internet radio
Hands-free functionality (Bluetooth
Bluetooth and Audio screen
Links to applications
- Smart Access
* Pandora's ® application must be installed to use
Pandora internet radio.
®
* Applications in development (notice provided on
Clarion's offi cial website)
Navigation
Traffi c reports
Internet radio
Voice commands
SNS
News
Weather
Phonebook
Hardware Specifi cations
IGeneral
Operation Temp.: -10 °C to +60 °C
Storage Temp.: -30 °C to +70 °C
Humidity: 0 to 90%, No Condensation
Input Voltage: 5V
NOTE
• If the menu fails to open, the device
and the iPhone may not be con-
nected properly. Make sure they are
connected correctly.
• If more than one iPhone has been
registered with the device, it search-
es initially for the iPhone it was last
connected with. After step 10, select
the iPhone you wish to connect to.
Adjusting the Direction and
Angle of the Display
The display can be adjusted left, right,
up and down. If you loosen its screw,
you can also adjust the angle of the
stand.
3 4
2
Screw
Weight: 310 g (10.93 oz) (Display unit)
Dimentions: W190 (7.48") x H112 (4.41") x D6.5 mm
(0.26") (min) to 14.7 mm (0.58") (max) (Display unit)
IDisplay
7" TFT display with touch panel (Resolution 800 x 480,
aspect ratio 16:9)
Touch panel keys: Pressure sensitive
IMicroSD: For software updates
® : HFP
IBluetooth
IAudio I/O:
Internal speaker, internal microphone (for voice rec-
ognition)
II/O:
Smartphone connection terminal, microphone IN (com-
patible with RCB-199 (sold separately) and RCB-204
(sold separately)), 5 V power IN, audio OUT (cable)
ILanguages:
English, French (Canadian), Spanish (Mexican)
When leaving your car, do not leave the display
® HFP)
in the car; take it out of the cradle and take it
with you or keep it inside the glovebox.
Removing from the Cradle
1
Turn off the vehicle's engine.
2
Unplug the car charger from vehicle's
power socket.
3
Press the cradle's Release button.
Take the display out of the cradle.
Release button