oneConcept 10004236 Manual Del Usuario página 21

Note: Maybe there is some difference between the preview image and saved image, please subject to the
image that you saved in SD card.
Quick Start
1. If you want to scan the films, please switch two switches on the top of the device to the left side. Otherwise
if you want to scan the photos, please switch to the right side.
2. Put Slide/Negative onto the Slide/Negative Holder or insert photo into appropriately sized photo tray
(5"x7"(5R), 4"x6"(4R), 3 ½"x5"(3R))
3. Insert the Slide/Negative Holder into the slot on the right of the device or insert photo tray into photo tray
slot from the top of the device.
4. Apply the power to the film & photo scanner by two ways:
(1) USB: Connect the film & photo scanner to PC with USB cable
(2) 5V adapter: Connect the adapter to the device with USB cable
5. Press POWER button to turn on the film & photo scanner.
(1) When the Film scanner mode is selected, the Film scan indication LED is on.
(2) When the Photo scanner mode is selected, the Photo scan indication LED is on.
6. Follow the menu on screen for scanning.
7. After finished the scanning, take out the memory card. The film & photo scanner has a built-in memory for
recording, when there is a memory card inserted, it will be the top priority for saving data.
8. Or read pictures from PC by USB mode
Home/MODE: Main menu
When the Film scanner mode is selec-
ted, the following main menu will ap-
pear:
1 Language mode
2 USB mode
3 Capture mode
4 Playback mode
5 Film Type
6 Resolution
Operation
21