Glacier bay 67364W-6A01 Guía De Uso Y Mantenimiento página 7

Installation (continued)
7
Attaching the horizontal rod and strap
□
Press the horizontal rod (P) down to ensure the stopper (J) is in the maximum open position.
□
Slide the clip (R) upward, adjust the location of the lift rod strap (Q) to the appropriate height and insert
the horizontal rod (P) with the correct hole of the lift rod strap (Q).
□
Move the lift rod strap (Q) in or out to choose an appropriate location.
□
Slide the clip (R) downward until it secures with the horizontal rod (P).
J
1
P
Hole
8
Adjusting the length of lift rod strap
□
If the pop up lift rod strap (Q) is interfering with your installation, as shown in the Fig 1, the lift rod strap (Q)
can be cut shorter.
□ Once you have identi ed the proper hole in the lift rod strap (Q) that is necessary for your installation, you
may cut off the bottom portion (1) of the lift rod strap (Q) by snapping off with pliers or cut off with a saw
at the cutting point (2), as shown in the Fig 2. Ensure the clip (R) does not slide off the lift rod strap (Q).
Fig 1
Q
R
2
R
3
3
Q
Q
J
Q
R
P
Q
R
7
Please contact 1-855-HD-GLACIER for further assistance.
J
P
1
2
Fig 2
HOMEDEPOT.COM/GLACIERBAY
Q
R
5