Tabla de contenido
current setting : 14
Relay 1, upper limit 2:
current setting: 18
new setting (press Return only to keep setting): 17 'Return'
current setting : 17
Relay 1, lower limit 3:
current setting: 13
new setting (press Return only to keep setting): 12 'Return'
current setting : 12
Relay 1, upper limit 3:
current setting: 15
new setting (press Return only to keep setting): 'Return'
current setting : 15
Como que se utiliza el código ISO, hay
el limite inferior y superior, es decir en total 6 valores. En el ejemplo mencionado, el
código ISO para el límite inferior es 16/14/12 y para el superior 20/17/15.)
Relay 2, measuring channel
0=SAE A, 1=SAE B, 2=SAE C, 3=SAE D,
4=ISO ch.0, 5=ISO ch.1, 6=ISO ch.2, 7=SAE A..D,
8=ISO code, 9=flow, 10=LED
11=4..20 mA input ch.1, 12=4..20 mA input ch.2
current setting: 4
new setting (press Return only to keep setting): 9 'Return'
current setting : 9
Relay 2,switching function
(0=no function, 1= within range, 2=outside range, 3= exceed, 4=fall below)
current setting: 0
new setting (press Return only to keep setting): 1 'Return'
current setting : 1
Relay 2, lower limit 1:
current setting: 30
new setting (press Return only to keep setting): 50 'Return'
current setting : 50
Relay 2, upper limit 1:
current setting: 150
new setting (press Return only to keep setting):'Return'
current setting : 150
(Para el límite inferior y superior se ha indicado 50 y 150 ml/min.)
HYDAC Filtertechnik GmbH
BeWa CS2000 3117721e es.doc
(elegido: caudal)
(elegido: dentro de banda)
es
ContaminationSensor serie CS 2000
que indicar un código de tres cifras para
Página 38
2008-05-28
Tabla de contenido
