Kohler Vinnata K-690 Guia De Instalacion página 5

Spray Hose
3. Flush Lines
- Place valve outlet hose into a bucket or suitable container.
- Turn on the hot and cold supplies.
- Turn the faucet handle to the full cold on" position and run water
to remove debris.
- Without turning the water off, rotate the handle to full hot to flush
any remaining debris.
4. Connect Spray Hose
- Slide the weight onto the spray hose.
- Make sure the hose ends are clean and the O ring is in place.
- Connect the two ends making sure they are fully engaged.
- Turn the faucet on (hot and cold) and check for leaks.
- Extend and retract the spray hose to check for smooth operation.
(Reposition supply hoses, if needed.)
Kohler Co.
Weight
O-Ring
Valve Outlet
Hose
5
C
1013943-2-