Tabla de contenido
Transmitters
① Power LED
- Green = unit is powered on
- Red = low battery
② On/Off Switch
Powers the transmitter on or off.
③ Display:
View menu screens and settings. Press any
control button to activate the backlight.
④ IR window
Align with the receiver IR window during an IR
sync for automated transmitter programming.
⑤ Menu Navigation Buttons
= Use to navigate between menu screens.
menu
▼▲ = Use to select menu screens, edit menu
parameters, or choose a home screen display option.
enter
= Press to confirm and save parameter
changes.
Tip: Press the
menu
button to exit without saving
parameter changes.
Battery Installation
① Accessing the Battery Compartment
Press the side tabs on the bodypack or unscrew the
cover on the handheld as shown to access the battery
compartment.
Setting the AA Battery Type
To ensure accurate display of transmitter runtime, set the battery type in the
transmitter menu to match the installed AA battery type. If a Shure SB900
rechargeable battery is installed, selecting a battery type is not necessary and
the battery type menu will not be displayed.
1. Press the
menu
button to navigate to the battery icon.
2. Use the ▼▲ buttons to select the installed battery type:
-
AL
= Alkaline
nH
-
= Nickel Metal Hydride
-
Li
= Lithium Primary
3. Press
to save.
enter
14
⑥ Battery Compartment
Requires 2 AA batteries or a Shure SB900
rechargeable battery.
⑦ AA Battery Adapter
Secures batteries when powering
transmitter with AA batteries instead of
Shure SB900 battery.
⑧ Bodypack Antenna
For RF signal transmission.
⑨ Handheld Integrated Antenna
For RF signal transmission.
⑩ Microphone Cartridge
See Optional Accessories for a list of
compatible cartridges.
⑪ TA4M Input Jack
Connects to a 4-Pin Mini Connector
(TA4F) microphone or instrument cable.
⑫ Battery Contact Cover
Align the cover as shown to prevent
reflections from the battery contacts during
broadcasts or performances.
AA Batteries
on
AA Adapter
② Installing Batteries
- AA Batteries: Place batteries (note polarity markings) and AA Adaptor as shown
- Shure SB900 Battery: Place battery as shown (note polarity markings), remove AA Adaptor
from bodypack transmitter, stow AA Adaptor in door for handheld transmitter
Note: If using AA batteries, set the battery type using the transmitter menu.
8
QLXD1
12
Shure SB900 Battery
AA Adapter
AA Battery Installation
Fully insert the batteries as shown to ensure proper battery contact and to
allow the door to latch securely.
Correct
10
11
1
2
3
QLXD2
3
4
4
on
2
5
5
6
6
7
7
9
on
Incorrect
Tabla de contenido
