Tabla de contenido
CARE AND CLEANING
This product contains no user
serviceable parts.
Refer service to qualified service
personnel.
1. Before cleaning, unplug the blender.
2. Always wash immediately after use
for easier cleaning. Don't let food dry
on the jar assembly as this will make
cleaning difficult.
3. Pour a little warm soapy water into
the jar and turn the knob to P
position for a few seconds. And
then empty the jar.
4. Dismantle all detachable parts. Lift the
jar assembly off the motor unit, To
detach the blade assembly by turning
it clockwise from the jar base bottom ,
and remove the seal ring 2 and blade
assembly (see fig.8). In addition,
detach the jar cover seal ring 1 from
the jar cover.
5. Rinse the measure cup, lid, seal ring
1, jar,
CAUTION
1) Do not immerse the motor unit in liquid to prevent the risk of electric shock.
2) Do not use rough scouring pads or cleansers on parts or finish.
seal ring 2 and blade assembly by
hands or in a dishwasher and then
dry.
components, but the temperature
setting shall not exceed 70).
5. Brush the blade clean using warm
soapy water, then rinse thoroughly
under the tap. Don't touch the sharp
blades, handle carefully.
Don't immerse the blade assembly in
water. Leave to dry upside down
away from children.
6. Wipe the motor unit with a damp
cloth and dry thoroughly. Remove the
stubborn spots by rubbing with non-
abrasive cleaner. If liquids spill into
the motor unit; first unplug the unit,
then wipe with a damp cloth and dry
thoroughly.
fig. 8
ENVIRONMENT FRIENDLY DISPOSAL
6
They are dishwasher safe
You can help protect the environment!
Please remember to respect the local
regulations: hand in the non-working
electrical equipments to an appropriate
waste disposal centre.
Tabla de contenido
