Tabla de contenido
HOW TO USE
Before initial use
1. Before first use, unpack the appliance
and place all parts on a horizontal
surface.
2. The jar assembly (including the measure
cup, lid, seal ring 1, jar, seal ring 2 , blade
assembly and jar base) has already been
assembled
into
Disassemble to wash all detachable parts
except the motor unit. Refer to the latter
chapter CARE AND CLEANING.
3. Once all pieces have been cleaned and
dry thoroughly, reassemble.
1) Invert the jar onto a level surface,
holding the jar handle, put the the seal
ring 2 and blade assembly onto the jar
base bottom and secure the blade
assembly by turning it anti-clockwise until
tight (See Fig.3).
the
motor
unit.
fig. 5
2) Reposition the jar assembly with its
opening upwards. Wrap the seal ring 1
around the lid bottom and put the lid onto
the jar assembly. Place the measure cup
exactly into the lid by fitting the small
projection on the both sides of the cup
into the slots of the lid and turning the cup
clockwise until tight. (See Fig.4)
3) Finally, place the assembled jar onto
the motor unit by aligning the strip on
the assembled jar bottom. (See Fig.5)
CAUSION: Jar and jar base is now secure.
Do not try to twist the jar and jar base onto
motor unit
fig. 3
4
fig. 4
Tabla de contenido
