Troubleshooting; Repair; Cleaning, Maintenance And Storage; Disposal - Ecom Ex-PMR 2000 Instrucciones De Uso

8.4.4

Troubleshooting

Possible causes
No function
Group members cannot be heard.
Other voices that do not belong
to the group can be heard on the
channel.

9. Repair

The national regulations and guidelines for repairs vary from country to
country. We therefore recommend that all repairs are conducted by ecom in-
struments GmbH, Germany because the safety of the unit needs to be tested
after repairs are implemented.

10. Cleaning, maintenance and storage

- Only use a damp and suitable cloth or sponge to clean the unit. Do not
use any solvents or abrasive cleaning agents when cleaning.
- It is recommended that you have the functionality and accuracy of the unit
inspected by the manufacturer every two years.
- The battery should be removed from the unit during prolonged periods of
storage.
- Do not allow storage temperatures to exceed or fall below the permitted
range of -20°C to +45°C.

11. Disposal

Old electrical devices as well as „historical" old electrical devices from ecom
instruments GmbH are supplied for disposal at our expense and disposed of
free of charge in accordance with European Directive 2002/96/EC and the
German electrical law of 16/03/2005. The costs associated with returning
devices to ecom instruments GmbH are to be borne by the sender.
34
Solutions
The battery status is too low, the battery
must be recharged or replaced.
Make sure that you have programmed
the same frequency, the same pilot
signal (CTCSS/DCS) or the same
5-tone / HDC2400
group members.
The group members may not be
within the reception area.
Make sure that all of the group
members have set the same audio
frequency.
signal as your
TM