List Of Surgical Headlamps; Maintenance; Cleaning - Cuda surgical NEURO Manual De Operación Y Servicio

4. LIST OF SURGICAL HEADLAMPS

CNH-80B Headlight includes:
Headlight module variable spot 20mm to 80mm
•
3.5mm bundle fiberoptic lensed headlight cable for use with 20mm-80mm spot
•
module.
Two Prepackaged, Sterile, Disposable Joysticks
•
Two garment clips
•

. MAINTENANCE

5
Storing the headlamp system in a safe place will prolong the life of the unit. Fiberoptic
cables are an optical instrument. The following guidelines will help in sustaining the
useful life of the headlamp system.
Forming the cable in sharp angles and kinks should be avoided whenever
•
possible. The internal fibers are made of glass which will break under
these conditions.
Keep the optical faces of the cable from touching hard surfaces which may
•
cause scratches on the surface. Scratches on the surface will diminish the
light output.
When cuts or punctures are visible in the silicone tubing, the cable is no
•
longer safe to use; it should be taken out of service immediately.

6. CLEANING

The headlamp module can be wiped with alcohol. The lens should be cleaned only
with lens tissue, available in any camera store; follow the directions on the package.
Follow all applicable bloodborne pathogen procedures as required by OSHA and/or
your hospital, when cleaning, disinfecting and sterilizing.
The sweatband may be cleaned using a standard wash cycle in warm water and
detergent.
The headband can be cleaned with an alcohol wipe down or washed with a lukewarm
solution of water and mild detergent. Rinse thoroughly.
The joystick is prepackaged, sterile, and disposable. It can be sterile soaked
but DO NOT steam autoclave.
WARNING: Do not autoclave the joystick, headband, lensed cables or
sweatband.
LIT118 CUDA
®
(English)
NEURO
Rev. F
Page 6 of 42