Emptying The Water Reservoir - WLabs ZERA Manual De Uso Y Cuidado E Instrucciones De Instalación

3.
Stir contents
Correct the jam by using a wooden spoon, tongs, or spatula to
stir the food around the mixing blades in the mixing bin to free
the jam.
Remove any hard food pieces such as bones that may be
blocking the mixing blades. The mixing blades are not sharp.
4.
Replace funnel
Place the funnel back in the mixing bin and close the lid.
5.
Plug in or reconnect power
Open and close the lid to start a leveling cycle.

Emptying the Water Reservoir

For best performance and to avoid buildup, drain the water
reservoir once a year.
NOTE: Turn off the food recycler and empty the water reservoir
before moving the unit to avoid water spillage.
1.
The Drain Water indicator will light
If the water reservoir is full, the Drain Water indicator light will
turn on.
NOTE: The Drain Water light may come on during a cycle, it is
not recommended to drain the water while a cycle is running.
2.
Remove output bin
Press down on the locking tab and pull out to remove output
bin from the food recycler.
3.
Locate drain hose
Drain hose
Locate the water reservoir drain hose on the left side of the
output bin housing.
NOTE: Discoloration of drain water is normal.
14