Beko CFB 6462 XG Manual De Instrucciones página 13

 I mportantsafetyandenvironmental
1
instructions
The Instructions for Use apply to
several versions of this appliance.
Accordingly, you
descriptions of individual features
that do not apply to your specific
appliance.
• The manufacturer will not be held
liable for any damages resulting
from incorrect or improper
installation.
• The minimum safety distance
between the cooker top and the
extractor hood is 650 mm.
• Check that the mains voltage
corresponds to that indicated on
the rating plate fixed to the inside
of the hood.
• For Class I appliances, check
that the domestic power supply
guarantees adequate earthing.
• Connect the extractor to the
exhaust flue through a pipe of
minimum diameter 120 mm.
• The route of the flue must be as
short as possible.
• Do not connect the extractor
hood to exhaust ducts carrying
combustion fumes (boilers,
fireplaces, etc.).
Hood / User Manual
• If the extractor is used in
may find
• The kitchen must have an opening
• When the cooker hood is used
• In the event of damage to the
• All air ducting regulations must be
• Never use the hood for purposes
conjunction with non-electrical
appliances (e.g. gas burning
appliances), a sufficient degree
of aeration must be guaranteed in
the room in order to prevent the
backflow of exhaust gas.
communicating directly with the
open air in order to guarantee the
entry of clean air.
in conjunction with appliances
supplied with energy other than
electric, the negative pressure in
the room must not exceed 0,04
mbar to prevent fumes being
drawn back into the room by the
cooker hood.
power cable, it must be replaced
by the manufacturer or by the
technical service department, in
order to prevent any risks.
complied with. The extractor hood
has been designed exclusively for
domestic use to eliminate kitchen
smells.
other than for which it has been
designed.
13 / EN