For your safety
ALWAYS
ALWAYS
ALWAYS
ALWAYS
ALWAYS
ALWAYS
ALWAYS
ALWAYS
ALWAYS
Electrical Requirements
Changing the
mains cable
4
Empty the water container after EACH drying cycle.
Clean the filter, it is essential that the filter is kept clear of fluff
after EACH drying cycle.
Ensure condenser is free of fluff. Regular cleaning is
recommended.
When the dryer is not in use, switch off, remove plug, and
close the door.
Comply with the specified electrical requirements.
Ensure that your dryer is installed correctly and has adequate
ventilation.
Finish every programme with the cool tumble cycle provided on
the control.
Observe the rules for drying garments:
In particular woollen articles should not be dried in a
tumble dryer unless they are labelled 'Superwash',
'Machine washable' or have the 'May be tumble dried'
symbol:
If in any doubt do not dry wool in the machine.
Unlike other materials, the mechanism of wool
shrinkage is irreversible, i.e. it will not stretch back to
the original size and shape.
Buy genuine accessories and spares.
WARNING: This appliance must be earthed!
REFER TO THE RATING PLATE FOR VOLTAGE AND CURRENT
REQUIREMENTS.
The dryer should be connected to the mains supply via a suitable
socket which is accessible after installing your dryer.
The wires in the mains lead are coloured in accordance with the
following:
GREEN/YELLOW - EARTH
BLUE
BROWN
If a replacement plug is to be fitted, the appropriate wire must be
connected to the correct terminal,the cut-off plug must be disposed
of safely. DO NOT leave where it can be inserted into a socket and
create a shock hazard.
Should the mains lead ever require replacing at any time please
contact your nearest Service Centre. A charge will be made for the
replacement of the mains lead or if you require a longer lead.
The mains lead must only be replaced by a specially prepared
cable obtainable from your Spares Stockist and fitted by a
qualified electrician.
NOTE: IF IN DOUBT ABOUT ANY OF THE ABOVE CONSULT
A QUALIFIED ELECTRICIAN.
- NEUTRAL
- LIVE