Emptying Your Water Container - Creda HB37679 Libro De Instrucciones

Emptying the Water Container
Water
Container
Plinth
Moulding
(not fitted to
all models)
To Empty Water
Container
12
Remove the water container after EVERY programme.
Failure to do this will result in the water container
becoming full and the load will not dry.
Do not block the vent hole in the cap!
This hole is essential for correct operation of your dryer.
Remove plinth (where fitted) by slightly lifting and sliding to the left.
Pull the container out of the dryer (a small amount of water may leak
from the vent hole if the container is tilted).
Remove the cap and empty the container into a sink (or other
suitable drain).
If your dryer is stacked on top of a Washing Machine, the Tumble
Dryer can be plumbed into the drain by attaching a suitable tube to
the stub at the rear of the dryer, after removing the blanking cap.
When plumbed into a drain the water container does not need to be
emptied.
Water
Container
Sink