Pentair INTELLIBRITE 5G LIGHT Guía De Usuario página 14

10
IntelliBrite
The following describes how to replace the IntelliBrite 5G Pool Light fuse assembly (if
applicable) and the light main circuit board for the IntelliBrite 5G pool light.
IMPORTANT! Before replacing the fuse assembly note the following:
Troubleshooting
Problem
Light does not function properly
The light will not illuminate.
INTELLIBRITE 5G Pool and Spa Lights Installation and User's Guide
®
®
5G Pool Light (12V) Fuse Harness
Replacement Overview
Cause/Action
Check the light wiring connection to the junction box
at the pool side and to the AC power switch.
Be sure that there is proper AC power applied to
the light.
Check the GFCI ground fault wiring and reset if
necessary. For 120 V lights only.
IntellliBrite 5G 12 V Light with Light Fuse
Assembly
Replace FUSE assembly (see page 13):
Note: Replacing the fuse assembly may or may
not resolve this problem. In some instances the
fuse assembly will blow, and after replacing
the fuse the light's circuit board is still not
functional. In this case, the circuit board must
be replaced.