JANE BABYSIDE Instrucciones De Uso Y Montaje página 17

4) Bring the mini cot closer to the parents' bed and adjust the height so that the mattress of the adult bed is above
the top edge of the open window.
To attach the co-sleeping mini cot to the adult bed, used the two additional straps provided with the mini cot.
* Note: In co-sleeping mode the same height must always be selected for both legs.
5) Fasten the black clasp of the additional strap to the clasp found on the lower part of the frame under the cover.
The red clasps on the strap should be facing upwards.
6) Pass the free end of the strap underneath the structure of the adult bed (A) and wrap it round to fasten the free
end of the red clasp with the red clasp positioned closest to the BABYSIDE mini cot.
A
DIVAN BEDS:
If the retractable legs of the mini cot touch the side of the structure of the bed that reaches the floor (divan bed...)
the leg locking device will need to be released by pressing the point indicated with one finger and using the other
hand to insert the leg to adjust it to the new length.
Press the unlocking point, conceal the leg and bring it into contact with the side of the bed until the mattress of the
mini cot is touching the adult mattress.
Tighten the 2 fastening straps securely.
7) If the legs of the co-sleeping cot go underneath the adult bed, proceed as before and bring the mini cot closer
until the mattress in the cot touches the mattress on the adult bed.
Tightening the 2 fastening straps securely.
WARNINGS:
-Check that the co-sleeping mini cot is securely attached to the adult bed, do this by pulling the mini cot away from
the adult bed.
-To prevent suffocation, the co-sleeping mini cot must ALWAYS be correctly attached to the adult bed using the
fastening system provided.
-Never use a different fastening system to the one supplied by Jané.
NOTE:
-There should never be any free space between the side bar of the window and the adult mattress.
-If there is any free space between the co-sleeping mini cot and the adult bed DO NOT use the product.
-Free spaces should not be filled with pillows, sheets, blankets or any other items.
8) Lock the wheels using the brakes fitted on them as explained in the 'Assembling and dismantling the co-sleeping
mini cot' section.
A
CLICK
*
2
1
"SLIDE"
2
"PRESS"
1
OK
MATTRESS
5
17
"click"
1 2
"PRESS"
STOP
NO
MATTRESS
5
2
1
3
4