Cleaning The Underside; Clean The Contact Pins And The Charging Strips; Battery Life - Worx Landroid M Manual Del Usuario

electric machine, you will need to take care when cleaning, so DO
NOT use a hose, high pressure washers or otherwise pour
running water on your Landroid
filled with water. When cleaning the machine body use a soft brush
or clean cloth and avoid using solvents or polishes (See Fig. L).
Lastly, make sure that you remove all build up of grass clippings
and debris.
B. Cleaning the Underside
Again, it is important that you power the Landroid
the ON/Off Button and wear protective gloves before
touching the Blade Disc (13).
First, flip your Landroid
Here you will see the Blade Disc (a), the chassis (b), and the Front
Wheel (15) and Driving Wheel (10). Clean everything thoroughly
with a soft brush or moist rag.
Rotate the Blade Disc to ensure it rotates freely. Check the blades
spin freely around the fixing screws. Remove any obstructions.
IMPORTANT: Remove any lodged debris so that it does
not cause a crack in the Blade Disc. Even the tiniest
crack can decrease your Landroid
and cause potential damage.
C. Clean the contact pins and the charging strips
Clean the Contact Pins (3) located on the Charging Base (4)
and the Charging Strip (5) located on the Landroid
cloth. Remove any build up of grass clippings and debris around
the contact pins and charge strips periodically to ensure the
®
Landroid M successfully charges each time.
14

6.3 Battery Life

The heart of the Landroid
maintenance is required. For proper storage of the battery, make sure
it is fully charged and kept in a cool dry place between (20°C-60°C).
Never let the battery be exposed to freezing temperatures.
The life-span of the Landroid
such as:
• The time span of the mowing season in your region.
• Amount of hours the Landroid
• Battery maintenance during storage.
®
Landroid M can be charged manually without the
boundary wire.
To manually charge the battery without connecting the
boundary wire to the charging base;
1. Connect the Charging Base to a suitable power supply.
2. Manually dock the Landroid
while the Landroid
3. The charging base red light will turn on.
4. While "charging" is shown on the screen. (See Fig.
®
N2) Landroid M will begin to charge.
®
5. Landroid M will be completely charged when the
light turns to a green color.
Lawn Mowing Robot
®
M, it is best to use a spray bottle
®
M upside down to expose its underside.
®
M's mowing output
®
M is its 28-volt lithium-ion battery. No
®
M's battery depends on various factors,
®
M mows per day.
®
M into the Charging Base
®
M is powered off.(See Fig. N1)
(a)
®
M OFF using
®
M using a
M
N1
N2
(b)
1
EN