Samoa 544 015 Guía De Servicio Técnico Y Recambio página 4

EN
REPAIR AND CLEANING PROCEDURE
CLEAN THE MUFFLER
1. Unscrew bolts (27).
2. Remove exhaust assembly (25).
3. Unscrew the bolts (24) and remove the cap (29).
4. Remove the felt (30).
5. Remove the felt (31) and deflector (28).
6. Remove the bottom felt (30) and replace it with a new one.
7. Put back the deflector (28).
8. Insert the screws (27) and then a new felt (31). If not in this order,
it could be tricky to insert the screws.
9. Put a new felt (30).
10. Put back the cap (29) and its screws (24).
11. Ensuring the screws (27) stay into the muffler (25), put said muffler
on the motor and fix it with said screws.
12. It is also available a whole muffler assembly kit (539005), with
replaces the old one just operating the screws (27).
AIR DISTRIBUTOR
1. Unscrew the bolts (24) and remove the cap (23).
2. Ensuring the screws (27) remain into the muffler (25), unscrew them
and take away the muffler. Take away the o-ring (16).
3. Strike gently with a plastic tool through exhaust seat to remove the
spool valve (19).
4. Replace the seals (18) and (20) with new ones or replace the whole
spool (19) with its seals factory installed (kit 539006). This is strongly
recommended in order to ensure the correct assembly of the seals.
4
854 816 R. 01/21
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
16
25
27
25
27
30
28
31
30
24
20
18
23
19
Fig. 6
24
17
29
Fig. 5