Table of Contents
Table of Contents .......................................................... 2
Warranty ......................................................................... 3
Pre-Operation ................................................................ 3
Specifications .................................................................................... 3
Package Contents ............................................................................ 3
Safety Information
Please read and understand this entire manual
□
before attempting to operate this product.
□
The safety instructions provided in this manual are
not intended to cover all possible conditions that
may occur during product operation. Always use
common sense and pay attention to safety
precautions in this manual.
Keep your work area clean and well lit. Cluttered
□
benches and dark areas increase the possibility of
personal injury or property damage.
Keep bystanders, children, and visitors away while
□
operating the inflator, as distractions can cause you
to lose control.
Use only a 2-wire extension cord that has a 2-blade
□
plug and a 2-slot receptacle that will accept the plug
on the product. Make sure your extension cord is in
good condition. When using an extension cord, be
sure to use one heavy enough to carry the current
your product will draw. For lengths less than 6 ft.,
use No. 18 AWG extension cords. An undersized
cord will cause a drop in line voltage, resulting in
loss of power and overheating.
This appliance has a polarized plug (one blade is
□
wider than the other). This plug will fit in a
polarized outlet only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install the
proper outlet. Do not change the plug in any way.
This inflator is designed to inflate car tires, bike
□
tires, ATV tires, sports equipment, air mattresses,
beach toys, and other inflatables. Do not use the
inflator for any purpose other than inflating, or
bodily harm or personal injury can occur. This
inflator is not designed to fill air tanks or air shocks.
Do not leave the inflator unattended during
□
operation.
Do not operate the inflator in wet or damp areas.
□
Operate the inflator only with the attachments that
□
are included.
Operation ....................................................................... 4
Maintenance .................................................................. 5
Replacing the Fuse . ......................................................................... 5
Troubleshooting ............................................................ 5
Allow inflator to cool 5 minutes after each 3 minutes
□
of continuous operation at 120 PSI. Allow inflator to
cool 10 minutes after each 10 minutes of continuous
operation at 70 PSI.
DANGER: For best results when using 12 Volt power
sources, it is recommended that you operate the
inflator with your vehicle's engine running. Make
absolutely sure you are outside or in an open, well-
ventilated area and not inside a confined area, such as
a garage, as bodily injury or asphyxiation could occur.
Always allow for proper ventilation.
CAUTION: Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases, or dust.
CAUTION: This inflator operates on both 12 Volt DC
and 120 Volt AC power sources. Do not attempt to
operate this inflator with any other source or voltage.
Do not rewire or reconfigure the inflator from its
original design, as personal injury or bodily harm may
occur.
CAUTION: Ensure that your vehicle 12 Volt vehicle
power outlet is free of any ash residue or debris. A
dirty power outlet can cause the inflator and power
cord to overheat, causing damage to your inflator or
vehicle, and could cause bodily harm or injury.
CAUTION: Do not overinflate. Please follow the
manufacturer's instructions for the item you are
inflating.
CAUTION: Use safety glasses and a face or dust mask
if needed.
IMPORTANT: Do not carry the inflator by the air
hose or power cord, as damage may occur.
2