THE BOLD LOOK OF KOHLER K-3099 Guia De Instalacion página 3

Countertop
Sealant (Not
Mounting
Furnished)
Bracket
Fastener (Not Furnished)
No Reveal Mounting
Countertop
Sealant (Not
Furnished)
Mounting
Bracket
Fastener (Not
Sink
Furnished)
Reveal Mounting
1. Preparation
Install the water supplies and drain piping according to the
roughing-in information.
NOTE: You may require different, more specialized tools to install
this sink to countertop materials other than wood or wood
composites.
NOTE: For multiple bowl installations of single basin sinks, a
minimum distance of 2-3/16" (5.6 cm) is required between bowls.
Any required support should be determined by the countertop
supplier.
Cut along the inside of the template line where indicated for the
countertop opening.
Position the template on the countertop. Check for adequate
clearance between the sink, faucet, backsplash and cabinet.
Trace around the template on the countertop with a pencil.
Centerlines are provided to help align the opening.
Locate the faucet hole centerlines on the countertop. Faucet
centerline clearance from the top of the cut-out must be 2-3/8" (6
cm) minimum for a No-Reveal sink and 1-3/4" (4.4 cm) minimum
for a Reveal sink.
Kohler Co.
C L of the Faucet
Sink
"X"
See centerline
table.
3
Cutting Line
1019948-2-D