Graham Field LUMEX RJ5500 Instrucciones De Ensamblaje Y Operación página 6

Using the Brakes
1. Pull up to apply brakes.
2. Push down to lock brakes for sitting.
3. Release brakes.
To Sit on Rollator Rest Seat
1. Push the hand brakes down, away
from the handles, until the hand
brakes lock into parked position.
2. Test the wheels before sitting down
to ensure the Rollator will not roll.
3. Before sitting, touch the back of your legs to the edge of the seat to ensure proper
positioning of the Rollator.
4. Hold onto handles if necessary to help you lower your body onto the seat.
WARNING: Ensure the brakes are in the locked position before using the rest seat.
WARNING: Distribute your body weight evenly on the Rollator rest seat. DO NOT lean on
one side of the Rollator.
WARNING: Before attempting to reach objects or pick them up from the floor by
reaching down between your knees, place both feet securely on the floor. Use extreme
caution when reaching for any object.
WARNING: DO NOT use this rollator as a wheelchair or transport device. Rollators ARE
NOT intended to be propelled while seated.
Folding the Rollator for Transport or Storage
1. Remove accessories, if any.
2. Flip up the back bar.
3. Lift the seat, move the pouch out of the way, and pull up on the folding pull strap attached
to crossbar underneath seat.
4. Rollator is ready for transport and storage after folding. You may elect to remove handles
before storage.
RJ5500-INS-LAB-RevA18
1
3
2
fig. 14
6