Honeywell RDWL915W2000 Guia De Operacion Y Instalacion página 9

Maintenance
Your doorbell and push button require no maintenance except periodically
changing the batteries.
If using the correct batteries, battery life should be approximately:
• Up to 5 years for the doorbell; replace with 4 C alkaline batteries
• Up to 2 years for the push button; replace with a CR2032 lithium battery
Low Battery Notification
When the doorbell batteries are low, the bottom edge of the halo light flashes
yellow every 6 seconds until the batteries are replaced.
When the push button batteries are low, two beep sounds are heard after the
normal tune.
Reset
This process removes all pairings, including the push button that came with
this doorbell:
1. Remove the doorbell batteries.
2. Press and hold the Setting button and replace the battery at the same
time.
3. The halo light will circle and the doorbell is returned to its default factory
settings.
Specifications
Operating Temperature
Honeywell Home ActivLink™
Range (open field)
Sound Level (typical)
Battery Type
Battery Life (5 activations/day)
Rain proof
Doorbell
-5ºC to 40ºC
916.8 MHz
450 ft (137 m)
90 dB
Input: 4 x C (1.5V) Alkaline / 8-16VAC
Up to 5 years
N/A
9