FIM M Serie: C Serie Manual De Uso Y Mantenimiento página 26

It reduces the speed of the motor.
It increases the speed of the motor.
The highest speed of the motor is shown with
speed comes automatically.
TIMER. It activates the hood at speed 1 for 10 minutes after which the motor
stops in automatic way. With timer in function the display is showing a flashing
led point.
AUTOMATIC CONTROL OF GREASE FILTERS AND CARBON FILTERS
The electronic controls with display and rectangular push buttons allow automatic control of the
grease filter and of the carbon filter (only when the hood is used in filtering version) so that the
user does not have to remember when maintanance was last carried out.
When the grease filters must be cleaned, there is
is issued.
When the carbon filters must be replaced, there is the
acoustic signal is issued.
TO PUT THE GREASE AND/OR CARBON FILTER CONTROL BACK TO ZERO
After filter maintanance has been carried out you have to:
Stop the motor (stop position);
■
Press twice in succession the
■
symbol is appearing in the display and a "beep" is issued.
SETTING SUCTION/FILTERING FUNCTION
The hood is delivered standard as a suction hood (saturation indicator
If the hood uses a plasma filter, do not set it in filtering mode.
If you wish to use the hood as filtering (saturation indicator
following:
Press at the same time for ca 5 seconds the push buttons
■
you will have the
To reset the hood just for suction use, repeat the above, in the display you will have the
symbol appearing.
Additional Functions: CHANGE OF THE COLOR TEMPERATURE OF LIGHT
With the light on:
Press at the same time the push buttons
■
maximum warm light point is reached;
Press at the same time the push buttons
cold light point is reached.
Additional Functions: SECONDARY LIGHT
If you keep on pressing the light Push button
disactivate the secondary lights.
Additional Functions: INTERVAL FUNCTION
The motor is switched on automatically 10 minutes each hour at the speed flashing in the
display.
push button, to confirm that reset has been made the
symbol followed by an acoustic signal.
and after 4 minutes the second
flashing in the display and an acoustic signal
letter flashing in the display and an
and makes the light warmer, until the
and makes the light colder, until the maximum
for more than 2 seconds you activate/or
26
).
and ) please do the
+ , in the display