Transport And Handling - Anest Iwata DDP 70 B Manual De Instrucciones De Uso Y Mantenimiento

DPS-70 C - DPS-70 CN DIAPHRAGM PUMPS

4. TRANSPORT AND HANDLING

To transport the equipment only the systems described below can be used. In any case make sure that the transport and
lifting device can bear the weight of the equipment with its packaging.
WARNING
ALWAYS KEEP THE PACKAGING IN VERTICAL POSITION.
IT IS ADVISABLE THAT THE STAFF IN CHARGE OF HANDLING THE EQUIPMENT WEAR PROTECTIVE
GLOVES AND SAFETY SHOES.
WHILE LIFTING OR HANDLING THE EQUIPMENT OR ANY OF ITS COMPONENTS CLEAR THE WORKING
AREA. LEAVE ALSO A SUFFICIENT SAFETY AREA AROUND THE EQUIPMENT TO AVOID DAMAGING
PEOPLE OR OBJECTS WHICH COULD BE THERE.
4.1 TRANSPORT WITH CARDBOARD PACKAGING
The equipment is put inside a cardboard packaging and wrapped with
some shockproof material.
4.2 HANDLING
WARNING
HANDLING BY MEANS OF HANDLE
4.3 TEMPORARY STORAGE
During transport and storage make sure the temperatures between 0 and 40° C are not exceeded.
In case of storage, make sure the equipment is not put in places with an excessive humidity.
4.4 CHECK ON THE PURCHASED PRODUCT
When you receive and before using the pump, make sure it has not been damaged during transport or storage. Also check
that all standard components are inside the packaging.
TO HANDLE THE CARDBOARD PACKAGING USE A TROLLEY.
FOLLOW THE INSTRUCTIONS ON THE PACKAGING BEFORE HANDLING AND OPENING IT.
HANDLING BY MEANS OF TROLLEY
EN
5