NuWave Duet 33851 El Manual Del Propietario página 32

CLEANING & MAINTENANCE
Cleaning Pressure Indicator Valve
Remove the Silicone Valve Gasket underneath
the Lid covering the bottom of the Pressure
Indicator Valve. When removed, the Pressure
Indicator will be released. If needed, clean the
Pressure Indicator Valve and Silicone Valve
Gasket before replacing.
When clean and dry, place
Pressure Indicator Valve back
through its hole. Replace the
Silicone Valve Gasket over the bottom of the
Pressure Indicator Valve. Ensure that the fit is
snug and that the Pressure Indicator is moving up and down freely.
Lid Holder
Use the Lid Holder for both the
PRESSURE Lid and Air Fryer
Lid to keep from touching hot
surfaces and to allow the lids to
cool down.
1. After using the PRESSURE
function, ensure that all
steam/pressure has been
released prior to removing
the lid.
See Releasing Pressure on
page 15.
2. Remove the PRESSURE Lid
from the Duet and place the
bottom of the Lid on the two
lower horizontal bars with the
rim resting in between each.
The underside of the Lid will face out.
32 32
cleaning & maintenance
Pressure
Indicator Valve
Inside
of Lid
Back of Lid
Lid Holder