Siemens SIMATIC NET SCALANCE X-300 Manual De Configuración página 398

Anexo D
D.1 Mensajes de error del SCALANCE X300 / X400
Avisos informativos sobre la aparición de un evento
Los avisos siguientes sirven para informar de eventos que no están directamente
relacionados con un estado de error (LED de error):
● User entry: <entrada de usuario>
● Unknown command <comando> for <nombre de protocolo> protocol received.
● Device is configured to ring <off | ARD | HRP client | MRP client | HRP manager | MRP
manager>.
● Standby function <Master | Slave>.
● Observer started.
● Observer stopped.
● Observer contacted Redundancy Manager <dirección MAC>.
● Standby is waiting for <partner | observer>.
● Standby <partner | observer> connected to <master | slave> <dirección MAC> <número
de puerto>.
● Standby <partner | observer> lost connection to <master | slave> <dirección MAC>
<número de puerto>.
● Port <número de puerto> is isolated ring port.
● Port <número de puerto> is static ring port.
● No SMTP connection to mail server.
Server IP address <dirección IP> TCP port <número de puerto TCP>.
● No SMTP application found.
Server IP address <dirección IP> TCP port <número de puerto TCP>.
● SMTP (E-Mail) connection aborted. Server IP address <dirección IP>.
● Unable to send message to syslog server. Please check syslog socket configuration.
● Connected to syslog server.
● SNMP: Authentification failure.
● R)STP: new root bridge detected.
● (R)STP: topology change detected.
● Unable to send E-Mail(s). Please check IP configuration.
● Unable to send trap(s). Please check IP configuration.
● Failure reply code <código de error> from SMTP server.
● Restart requested.
● No C-PLUG found. Internal flash memory used.
● An empty C-PLUG was found.
● C-PLUG format request.
● A filled C-PLUG was found.
● A corrupted C-PLUG was found.
398
Manual de configuración, 03/2015, C79000-G8978-C187-23
SCALANCE X-300 / X-400