AERMEC Srp ELESTA DOMOTESTA 300 Manual De Uso página 21

1 2 3 4 5 6 7
B
Dat.
A
Dat.
24
2
22
4
20
18 6
D
16 8
14
10
12
C
Service
K
1-7
N
1
2
1 2 3 4 5 6 7
Dat.
A
Dat. 24
22 2
20 4
18
6
16
8
14
10
12
C
Service
K
1-7 N
1
2
ZONES SET POINT PROGRAM CHANGE/SETTING
-3 +3
PC-Sercvice
3
4
BOILER SET POINT PROGRAM CHANGE/SETTING
B
D
-3 +3
PC-Sercvice
3
4
In this section it is possible to set the desired temperature
for the different operation modes (normal
antifreeze ); the procedure to set the temperature is
the following:
Press ( ) until reaching the symbol indicated in the figure
with the (A) cursor; now select the circuit to be changed or
set (using the key with the letter K encircled); finally, modify
the value displayed (D) with the increasing (
sing ( ) keys.
From this menu it is possible to modify three types of data,
represented by various values of the (C) index and the (B)
symbol; to go from one value to the other, press (
The values that can be modified represent:
• (C) index = 1; Antifreeze program temperature set;
• (C) index = 2; Reduced program temperature set;
• (C) index = 3; Normal program temperature set;
In this section it is possible to set the desired temperature
of the boiler for the different operation modes (normal
reduced , antifreeze ); the procedure to set the tem-
perature is the following:
Press ( ) until reaching the symbol indicated in the figure
with the (A) cursor; finally, modify the value displayed (D)
with the increasing ( ) or decreasing (
From this menu it is possible to modify three types of data,
represented by various values of the (C) index and the (B)
symbol; to go from one value to the other, press (
The values that can be modified represent the boiler tem-
perature set in the various programmes:
• (C) index = 1; Antifreeze program temperature set;
• (C) index = 2; Reduced program temperature set;
• (C) index = 3; Normal program temperature set;
, reduced ,
) or decrea-
)
N
,
) keys
)
N
21