Klarstein Cookio Manual Del Usuario página 29

What? How?
Boilovers, melts, Remove these immediately
and hot sugary with a fish slice, palette knife
spills on the or razor blade scraper suitable
glass for ceramic glass cooktops, but
beware of hot cooking zone
surfaces:
1. Switch the power to the
cooktop off at the wall.
2. Hold the blade or utensil at
a 30° angle and scrape the
soiling or spill to a cool area
of the cooktop.
3. Clean the soiling or spill up
with a dish cloth or paper
towel.
4. Follow steps 2 to 4 for
"Everyday soiling on glass"
above.
Error codes
Problem
E0 Unsuitable cooking utensils or the
cooking utensils are not positioned
centrally on the cooking zone.
E1 Error in the internal circuit.
E2 Overheating.
E3/ Voltage is too high / too low.
E4
E5 Error or short circuit of the
temperature sensor or other parts.
E6 The hotplate is overheated.
Important!
• Remove stains left by
melts and sugary food
or spillovers as soon as
possible. If left to cool on
the glass, they may be
difficult to remove or even
permanently damage the
glass surface.
• Cut hazard: when the
safety cover is retracted,
the blade in a scraper
is razor-sharp. Use with
extreme care and always
store safely and out of
reach of children.
Possible cause and solution
approach
Use suitable cookware and place it in
the middle of the cooking zone.
Contact customer service.
Make sure that the ventilation opening
is not blocked.
Use a power outlet that matches the
specified voltage.
Contact customer service.
Allow the plate to cool down briefly
before using it again.
EN
29