cod.92004 – TDU 210PS
EQUIPMENT
1 pc. Table & mitre saw
1 pc. Instruction manual
TECHINCAL DATA
Model
Mains voltage
Mains frequency
Power input
Speed
Saw blade diameter
Blade bore
Max. cutting depth
Min. tooth thickness
Max. depth of cut
table saw position
cut-off saw position
Max. cutting capacity (thickness x width) in the cut-off saw position
0° mitre, 0° bevel
45° mitre, 0° bevel
0° mitre, 45° bevel
45° mitre, 45° bevel
Bevel angle
Table dimensions
Weight
Vibration level
Level of sound pressure measured according to EN 61029-1:2000:8E320
LpA (sound pressure)dB(A)93.5
LWA (acoustic power)dB(A)106.5
El aparato ha sido diseñado para efectuar cortes rectos y en curva con un ángulo de inglete de hasta
45°.madera, roduct, metal. Utilice las hojas de sierra recomendadas.
Cualquier utilización no conforme con las indicaciones contenidas en estas instrucciones puede provocar
daños a la máquina y poner seriamente en peligro la vida del utilizador. Para proteger los derechos de
garantía y para la seguridad del roduct, se recomienda respetar rigurosamente las roduct cies de
seguridad. Por razones relacionadas con las características de fabricación del roduct, no se pueden excluir
completamente todos los otros riesgos.
GENERAL SAFETY REGULATION
• Read this manual carefully before operation to avoid the hazards such as electric shock, burn of fire.
• The work area must be kept clean to avoid danger.
• Pay attention to the environment, do not expose the tool in rain or humid place. Keep work area lit up.
Don't use the tool in presence of inflammable liquid or gas.
• Pay attention to do not touch the grounding parts, pipes, heat elements, so that to avoid electric shock.
• Take care of the tool. Put it in dry place when not in use, and far from children.
• Don't overload the tool. Operate only within the load level suggested.
• Dress properly : Don't wear loose clothing or jewelry because they can be caught in moving parts. Rubber
gloves and non-skid footwear are recommended when working. Wear protective hair covering to contain
long hair.
• Use safety glasses and dust musk if operation is dirty.
• Never carry the tool by cord or yank it to disconnect from receptacle. Keep cord far from heat, oil and
sharp edges.
TDU 210PS – cod. 92004
V 230
Hz 50
W 1.200
min-1 4.600
mm 210
mm 30
mm 2,5
mm 1,5
mm 35
mm 33
mm 55 x 120
mm 55 x 65
mm 43 x 120
mm 23 x 40
0-45°
270 x 382 mm
10,3 kg
0,7 m/s2
16