Promaker PRO-TP500 Manual Del Usuario página 15

chuck screw may become loose,
causing the chuck jaws to bind and
prevent them from closing. To tighten
the chuck, follow these steps:
1. Insert the hex key into the chuck
and tighten the chuck securely.
2. Tap the hex key sharply with a
mallet in a CLOCKWISE direction
(Fig. 11). This will tighten the chuck
on the spindle.
3. Open the chuck jaws and remove
the hex key.
4. Tighten the chuck screw using a
#2 screwdriver.
NOTE: Turn the screw COUNTER-
CLOCKWISE to tighten it. This
screw has a left-handed thread.
MAINTENANCE
GENERAL
WARNING: When servicing,
use only identical replacement
parts. The use of any other part
may create a hazard or cause
product damage.
DO NOT use solvents when
cleaning plastic parts. Plastics are
susceptible to damage from various
types of commercial solvents and
may be damaged by their use. Use
a clean cloth to remove dirt, dust,
oil, grease etc.
WARNING: Do not allow brake
fluids, gasoline, petroleum-based
products, penetrating oils, etc.
to come into contact with plastic
parts. They contain chemicals
that can damage, weaken or
destroy plastic.
DO NOT abuse power tools. Abusive
practices can damage the tool and
the workpiece.
WARNING: DO NOT attempt
to modify
accessories. Any such alteration
or modification is misuse and
could result in a hazardous
condition leading to possible
serious injury. It will also void the
warranty.
LUBRICATION
All of the bearings in this tool are
lubricated with a sufficient amount
of high-grade lubricant for the life
of the unit under normal conditions.
tools or create
15